Book a demo
Menu

Seenyor Australia / How Seenyor works

How Seenyor works

How Seenyor fall detection works

A palm-sized radar sensor goes on the ceiling. It reads movement with radio waves, not pictures, works out when someone has gone down and stayed down, then tells the people who need to know.

Seenyor fall detection sensor working quietly in a living space

The sensor

Radar, not cameras

How it senses

Seenyor uses millimetre wave radar. It reads movement and position, never faces, and it cannot see through walls. There are no images or video at all.

Where it goes

Usually the ceiling, 2 to 3 metres up, square to the walls, much like a smoke alarm. The wall (1.6 to 1.8 metres) is the fallback when a ceiling fan or big pendant light is in the way.

What it covers

About 24 square metres for fall detection. Heart rate and breathing are read in a 3 by 3 metre area under the sensor, so it usually sits over the bed.

What it notices

What Seenyor detects and alerts on

FallsAn alert once someone has been on the floor for 60 seconds (adjustable).
Bed exitsAn alert when the person actually leaves the bed, for example overnight. Restless sleep is not a bed exit.
Long staysAn alert if someone stays in an area, such as the bathroom, longer than you set.
InactivityAn alert when nobody has come or gone for 24 hours.
SleepSleep quality and stages, with a sleep report each morning.
Heart rate and breathingFor one person lying in a monitored bed area, including breathing-stop events.
Room comings and goingsRoom entries and exits are logged in the app's history.

There is no dedicated wandering alert, and Seenyor does not measure blood pressure. Pets sharing the room can cause false alarms.

What happens when Seenyor raises an alert

1

Something happens

A fall, a bed exit in the small hours, or an unusually long time in the bathroom.

2

Phones buzz

The Seenyor app alerts the family, carers or staff you chose. Alerts are marked done in the app once handled.

3

Someone talks

On the 24/7 plan an Australian monitoring centre also gets the alert and its operators can speak through the device and coordinate help.

4

It is all on record

Every alert and response is logged, which is useful for incident reports, audits and plan reviews.

Watch

Seenyor in action

A fall, noticed and answeredSeenyor video, 29 seconds
Meet the sensorSeenyor video, 36 seconds

What it needs

  • A normal power point that stays switched on. There is no battery, so label it "do not switch off".
  • 2.4 GHz Wi-Fi. 5 GHz on its own will not do.
  • About 70 cm of clear space around the sensor, and some distance from fans, heaters, air conditioners, curtains and mirrors.
  • The mounting height entered in the app within 5 cm of the real height. Measure it, never guess.

What it will not do

  • Prevent a fall. It makes sure a fall is noticed quickly.
  • See into another room, past a partition or outside.
  • Keep working in a power or Wi-Fi outage.
  • Replace care, supervision or 000. It is assistive technology and not a medical device.

See Seenyor working before you decide

A short online demonstration shows the live room map, an alert arriving and the sleep report, using a real setting like yours.

Or call 1800 ASK PURPLE (275 787).